Ok, so the title is an inside joke.
On Monday I began having some issues on my Vista Tablet.
- The computer isn’t able to obtain an IP address from the DHCP server
- An error: error 56 the cisco systems, inc vpn service has not been started
- Unable to uninstall SEP11
- Unable to perform a rollback to a previous snapshot
- Unable to open tcp/ip properties because supposedly another dialog was already open
I’m blaming Symantec Endpoint Protection 11. That was the last change to the system.
If you can’t get an IP address with DHCP, did you try turning off the “Network Security” portion of Endpoint Protection 11 and re-trying? If that works then it is likely the culprit. If not, then it isn’t.
And try asking on the Symantec technical network forum for endpoint 11:
https://forums.symantec.com/syment/board?board.id=endpointcust
Hello,
Check your firewall settings to allow DHCP traffic both on the client and DHCP Server if you have installed SEP 11.0 on both.
If you still need assistance you can find the Symantec Endpoint Protection knowledge base and contact information for Technical Support at this location.
http://www.symantec.com/business/support/contact_techsupp.jsp?pid=54619
sorry I missed these comments. I didn’t check the spam filter often enough.
I decided to reimage.